Filter Products
HUB CAPS & GASKETSSort by
Show
Brand
Product type
Price
$
–
$
HUB CAPS & GASKETS
59 results
48 Items
Sort by:
Best selling
Elite Truck Parts 5/8" Nylon Air Brake Tubing - Black -100Ft Roll | ETP-451033
Brand:
Elite
SKU:
ETP-451033
Price:
$159.86
Elite Truck Parts Screw In Plastic Hub Cap (9K-10K Gd & 10K-15K Dx) | ETP-021-036-00
Brand:
Elite
SKU:
ETP-021-036-00
Price:
$5.38
Elite Truck Parts Screw In Plastic Hub Cap (6K-8K) | ETP-021-035-00
Brand:
Elite
SKU:
ETP-021-035-00
Price:
$13.38
Extensive industry knowledge available when you need it.
Contact us today for expert assistance sourcing your part.
Hub Caps & Gaskets For Peterbilt Trucks
Hub caps seal the wheel end hub cavity on oil-lubricated axles, protecting bearings and gears from contamination while keeping gear oil contained. A leaking hub cap gasket is one of the most common wheel-end fluid loss sources on Class 8 trucks — and oil on brake linings from a hub leak is an immediate out-of-service condition. We carry hub caps, hub cap gaskets, sight glass assemblies, and fill plugs for common Peterbilt drive and trailer axle configurations.
Frequently asked questions about hub caps & gaskets
How do I know if my hub cap gasket is leaking?
Oil streaking down the wheel face, oil residue on the inside of the wheel, or a wet ring around the hub cap perimeter are the most visible signs of a leaking hub cap gasket. On a pre-trip inspection, the inner wheel face and hub area should always be checked for oil. Even a minor seep should be addressed — what starts as a gasket weep can progress to a full seal leak that contaminates the brake linings and creates a hazardous braking condition.
How often should hub cap gaskets be replaced on a Peterbilt?
Hub cap gaskets don't have a fixed replacement interval — they're typically replaced when the hub cap is removed for bearing service, oil level checks, or wheel end inspection. Cork and rubber gaskets compress and take a set over time, so a gasket that's been removed and reinstalled multiple times may not seal reliably and should be replaced with a new unit at each removal. Keeping a supply of the correct gaskets for your axle make on hand prevents a hub cap R&R from turning into a parts run.
What type of oil do I use to fill a hub on a Peterbilt drive axle?
Most Peterbilt drive axles use a gear oil specified by the axle manufacturer — Meritor axles typically call for SAE 75W-90 or 80W-140 gear lubricant meeting their specification. Some newer axles use synthetic gear oil for extended drain intervals. Always use the axle manufacturer's specified lubricant type and viscosity — mixing incompatible lubricants or using the wrong viscosity can cause premature bearing and gear wear. Check the axle nameplate or service manual for the correct specification for your specific axle.