STRAPS

Straps For Peterbilt Trucks

Cargo straps are the most versatile and widely used load securement tool in commercial trucking -- ratchet straps and winch straps in the right working load limit keep freight secured to flatbeds, step decks, and open trailers across every type of load. Keeping a supply of quality straps in good condition is essential for compliant and safe cargo securement under FMCSA regulations. We carry ratchet straps, winch straps, and tie-down straps in a range of lengths and load ratings for Peterbilt flatbed and open-deck applications.

Frequently asked questions about straps

What working load limit do I need for cargo straps on my Peterbilt?

The working load limit (WLL) required depends on the weight of the cargo being secured and the number of straps used. FMCSA cargo securement regulations require that the combined WLL of all tie-downs meets or exceeds the weight of the cargo for loads under 10,000 lbs (and different requirements for specific cargo types and heavier loads). Standard 2-inch ratchet straps typically have a WLL of 3,333 lbs. Always check that your strap's WLL matches the demands of your specific load -- never use a strap that shows wear, cuts, or damage in the webbing regardless of its original rating.

How do I know when a cargo strap needs to be replaced?

Replace a strap immediately if it shows cuts or tears in the webbing, significant abrasion that has worn through more than 10 percent of the webbing width, end fittings that are bent, cracked, or have significant corrosion, or a ratchet mechanism that doesn't lock or release cleanly. FMCSA regulations require that all tie-down devices be in proper working condition -- a damaged strap is not acceptable for cargo securement regardless of whether the hardware still functions. Inspect straps before every use and retire any that show damage.

What is the difference between a ratchet strap and a winch strap?

A ratchet strap uses a hand-operated ratchet buckle to tension the webbing and is the most common tie-down for lighter flatbed loads and general cargo securement. A winch strap is wider (typically 4 inches) and designed to work with flatbed trailer winches mounted on the trailer side rails -- the strap wraps around the winch drum and is tensioned by cranking the winch. Winch straps handle higher loads and are standard equipment on flatbed trailers hauling heavy machinery, steel, and lumber. The two systems are not interchangeable.

Other parts you might need

Shop binders for Peterbilt trucks